I am running the 3.1 debug and I get to the screen with the TV and arrow but cannot seem to get to the update menu. I've tried FN+left and Alt+L to no avail. Can anyone tell me what I'm missing? And yes, I'm sure that the keyboard works and has batteries in it.
Thanks
Logitech Revue 3.1 Official Release
Moderator: Revue Mod
-
- Android 1.0
- Posts: 1
- Joined: Thu Dec 08, 2011 12:57 pm
- GTV Device Owned: Logitech Revue
-
- 2.2 Froyo
- Posts: 232
- Joined: Thu Dec 08, 2011 9:57 am
- GTV Device Owned: Logitech Revue
Re: Logitech Revue 3.1 Official Release
try using adb method of getting into the recovery. and make sure you flash the un-neutered recovery on the userdebug
LGVM670 - CM 9
IPhone 3GS - IOS 5.1.1
Revue - HC 3.2
Aspire 3000 - JoliOS
IPhone 3GS - IOS 5.1.1
Revue - HC 3.2
Aspire 3000 - JoliOS
Re: Logitech Revue 3.1 Official Release
Can anyone confirm if DTS is supported in this official update?
Re: Logitech Revue 3.1 Official Release
WORKED PERFECT! Thanks for all you do for the community!
Re: Logitech Revue 3.1 Official Release
I'm reasonably new to all of this (revue hacking) but just wanted to double check what reflashing the recovery meant:hellasleeper wrote:Successfully installed the official update over the debug version. Thank you zenofex...you are the man. Just needed a reflash of that recovery and then alt + L worked like a charm.
Does it mean to use adb and reinstall the recovery on the user debug 3.1? (using the instructions from http://forum.gtvhacker.com/revue/topic254-60.html) Or is it something more simple?
From what I have read so far:
2.1 = must install build on frontpage (3.1 Beta) of this thread before the Official Release (or wait for an actual OTA one)
3.1 Beta = just install the Official Release
3.1 Debug = just install the Official Release
3.1 Debug with Recovery = install Official Release, but (may) need to reflash recovery to complete installation
Does that sound correct, or have I misunderstood something?
Re: Logitech Revue 3.1 Official Release
I've updated just fine but it seems I've lost the browser? has this happened to anyone else?
Also I can confirm DTS audio on .mkv files still does not work.
EDIT: Factory reset fixed all problems.. DTS still does not work.
Also I can confirm DTS audio on .mkv files still does not work.
EDIT: Factory reset fixed all problems.. DTS still does not work.
Last edited by Shiftedx on Thu Dec 08, 2011 1:47 pm, edited 1 time in total.
Re: Logitech Revue 3.1 Official Release
Add me to the updated list. I did have to reflash the recovery (which I had flashed for the 1st time just yesterday). The other issue I bumped into was that my USB was not immediately recognized. I tried twice and then, still in recovery, pulled it out and stuck it into the slot next to the ethernet cable. Chose update from USB again and it was recognized immediately. Thought I'd mention it in case other had the same problem and were not sure what to do. YAY! Thanks for all the hard work.
Re: Logitech Revue 3.1 Official Release
NZ Buc wrote:I'm reasonably new to all of this (revue hacking) but just wanted to double check what reflashing the recovery meant:hellasleeper wrote:Successfully installed the official update over the debug version. Thank you zenofex...you are the man. Just needed a reflash of that recovery and then alt + L worked like a charm.
Does it mean to use adb and reinstall the recovery on the user debug 3.1? (using the instructions from http://forum.gtvhacker.com/revue/topic254-60.html) Or is it something more simple?
From what I have read so far:
2.1 = must install build on frontpage (3.1 Beta) of this thread before the Official Release (or wait for an actual OTA one)
3.1 Beta = just install the Official Release
3.1 Debug = just install the Official Release
3.1 Debug with Recovery = install Official Release, but (may) need to reflash recovery to complete installation
Does that sound correct, or have I misunderstood something?
"Reflashing the recovery" is for people running the debug version of 3.1. The beta version recovery works fine. The debug version recover requires extra steps. What version are you on now?
Re: Logitech Revue 3.1 Official Release
Everything was working ok, but Live TV just lost audio. I don't know why. I never got live tv audio again. Restart or reset didn't help. Restart stb also didn't help. Change the hdmi cable and still no audio.
It is really strange. Audio was ok and just stopped working...
EDIT: STB ins't working ok.
Have to buy a new one.
It is really strange. Audio was ok and just stopped working...
EDIT: STB ins't working ok.

Last edited by rgomesf on Fri Dec 09, 2011 2:55 am, edited 1 time in total.
Re: Logitech Revue 3.1 Official Release
I am on the 3.1 User Debug build, with the original HC recovery flashed onto it via adb. (From this thread: http://forum.gtvhacker.com/revue/topic254.html)bartnyogi wrote:NZ Buc wrote:I'm reasonably new to all of this (revue hacking) but just wanted to double check what reflashing the recovery meant:hellasleeper wrote:Successfully installed the official update over the debug version. Thank you zenofex...you are the man. Just needed a reflash of that recovery and then alt + L worked like a charm.
Does it mean to use adb and reinstall the recovery on the user debug 3.1? (using the instructions from http://forum.gtvhacker.com/revue/topic254-60.html) Or is it something more simple?
From what I have read so far:
2.1 = must install build on frontpage (3.1 Beta) of this thread before the Official Release (or wait for an actual OTA one)
3.1 Beta = just install the Official Release
3.1 Debug = just install the Official Release
3.1 Debug with Recovery = install Official Release, but (may) need to reflash recovery to complete installation
Does that sound correct, or have I misunderstood something?
"Reflashing the recovery" is for people running the debug version of 3.1. The beta version recovery works fine. The debug version recover requires extra steps. What version are you on now?