Page 2 of 6
Re: Bricked Revue With Triangle Logo and "!" ? Read this
Posted: Fri Dec 09, 2011 3:14 pm
by zenofex
Andreslopezg wrote:This method is also for those who applied the 55579 and remains only in the start screen logitech?
No, I recommend the following posts for those users:
http://forum.gtvhacker.com/troubleshoot ... ic162.html
Re: Bricked Revue With Triangle Logo and "!" ? Read this
Posted: Sun Dec 11, 2011 7:21 am
by resno
I find this funny, this is topic number 404! The bricked revue fix ha!
Re: Bricked Revue With Triangle Logo and "!" ? Read this
Posted: Sun Dec 11, 2011 10:24 am
by Discovered
haha, good point!!
Re: Bricked Revue With Triangle Logo and "!" ? Read this
Posted: Sun Dec 11, 2011 10:31 am
by Berserk
I would try Zenofex solution to fix my revue with applied the 55579 firmware and wich remains only in the splash screen.
Re: Bricked Revue With Triangle Logo and "!" ? Read this ::
Posted: Sun Dec 11, 2011 2:06 pm
by valkyr
Anyone know about how long it takes to build from the zip file when you wire the usb cable in?
I tested the CTRL-ALT-DEL from the keyboard = SUCCESS!
I plugged in my USB drive, while the revue was rebooting and I still have the yellow triangle. The way I read the instructions, the update is applying in the background? Or no?
Should I see anything on the screen while the update is being built?
Re: Bricked Revue With Triangle Logo and "!" ? Read this
Posted: Sun Dec 11, 2011 3:23 pm
by Discovered
When i installed the official update via usb I did not have any choice for anything nor see anything, it said it was formatting in the left corner and then shorlty after, no longer than ten minutes it restarted.
Re: Bricked Revue With Triangle Logo and "!" ? Read this
Posted: Sun Dec 11, 2011 3:36 pm
by valkyr
When you say via USB, you mean with the soldering iron usb hack, or the plug into the back usb update?
If you used the soldering iron hack, I have some questions:
1.) what size is your usb partition sizes? Are they ext3?
2.) is the USB stick bootable - either partition?
3.) Do you have any other partitions besides the ext3 partition(s)?
Re: Bricked Revue With Triangle Logo and "!" ? Read this
Posted: Sun Dec 11, 2011 3:51 pm
by Discovered
no it is not, someone has reported having to mbr there usb drive though.
Re: Bricked Revue With Triangle Logo and "!" ? Read this
Posted: Sun Dec 11, 2011 4:53 pm
by valkyr
I'm not sure what is going on with my revue.
The solder hack works for the keyboard but as far as I can tell, the USB drive is not being accessed at all when the revue reboots.
Here's what I *think* I'm supposed to be doing:
1. Verify keyboard works with solder hack - done and works
2. Reboot Revue using keyboard and immediately unplug keyboard and plug in USB stick as revue reboots
3. update should automatically begin?
The USB doesn't seem to get accessed at all (no blinking light on usb stick)
The screen returns to white triangle with black exclamation mark.
Re: Bricked Revue With Triangle Logo and "!" ? Read this
Posted: Mon Dec 12, 2011 3:18 am
by Berserk
I did solder job and it looks good. But Ctrl-Alt-Del combination doesn't work. Please look at photo
http://i.imgur.com/6EtfJ.jpg
http://i.imgur.com/P45Rm.jpg
http://i.imgur.com/Vnyoj.jpg
http://i.imgur.com/VN8TM.jpg
P.S. My revue stuck at Logitech Revue splash screen.
