Page 1 of 1
Unable to flash new leak
Posted: Mon Oct 10, 2011 4:24 am
by DcMasta
Followed steps to a T. still unable to flash it.
I'm running the 3.1 beta, trying to upgrade to the leak.
I get to recovery, go to select update.zip from SDCard.
Code: Select all
E:Failed to mount /SDCARD (No such file or directory exists)
I've tried 2 flash drives, left and right usb port. I let i t boot up and sync the flash drive then tried left and right. Nothing......
Any Ideas? Tried the same drive that I used to flash the initial leak.
Re: Unable to flash new leak
Posted: Mon Oct 10, 2011 7:53 am
by netomx
try to manually select the zip file
Re: Unable to flash new leak
Posted: Mon Oct 10, 2011 7:59 am
by DcMasta
netomx wrote:try to manually select the zip file
When I try to do that I get the error I posted above.
Re: Unable to flash new leak
Posted: Mon Oct 10, 2011 10:05 am
by DcMasta
anyone else have suggestions?
Re: Unable to flash new leak
Posted: Mon Oct 10, 2011 11:44 am
by killer4110
Go to the Gtv drop box account and try the file that is in there, other people have used it after having issues and it worked for them.
Re: Unable to flash new leak
Posted: Tue Oct 11, 2011 8:37 am
by DcMasta
killer4110 wrote:Go to the Gtv drop box account and try the file that is in there, other people have used it after having issues and it worked for them.
I will try that tonight when I get home and share my results.
Can someone verify which port the flash drive should be plugged into?
Re: Unable to flash new leak
Posted: Tue Oct 11, 2011 11:52 am
by cj_000
Make sure your flash drive is formatted fat32. If your on a windows box, they like to format drives NTFS at times!
Re: Unable to flash new leak
Posted: Wed Oct 12, 2011 4:19 am
by DcMasta
Well son of a [female dog], nothing worked at all. Then I formatted the drive via the
http://download.cnet.com/HP-USB-Disk-St ... 74082.html HP USB format tool. I didn't even have to rename the file.