Page 1 of 1
I Think I'm bricked
Posted: Mon Sep 19, 2011 2:52 pm
by Gunnyman
Well I screwed up and flashed the update to the Honeycomb Debug without flashing the first update. I renamed the wrong file update.zip and now only boot to an Exclamation point in the triangle.
Is there anything I can do? Is it possible to push the files and update via adb shell?
I'm pretty good at getting around in android so I can handle the procedure if there is one.
Thanks
Re: I Think I'm bricked
Posted: Mon Sep 19, 2011 3:10 pm
by cj_000
Sadly you are bricked.
Specifically, in that version that you updated to the recovery functionality was removed (so, it does not work).
Unfortunately there is no software fix for this type of brick - there might be a hardware way, but your talking pulling flash chips = not the easiest for most people.
Re: I Think I'm bricked
Posted: Mon Sep 19, 2011 3:11 pm
by Gunnyman
Ok thanks.
Live and learn I suppose.
Re: I Think I'm bricked
Posted: Tue Sep 27, 2011 9:57 am
by tolu24
I installed Honeycomb 3.1 on my Logitech Revue(1b3a6b1aa9fd.mp-signed-ota_update-b55579) but, after access in recovery and install update.zip, out error installation aborted failed to stat build.pro.
install/sdcard........
finding update packege.......
opening update pacckage.........
installing update.......
file_getprop: failed to stat /mnt/system/build.prop
E:Error in /tmp/sideload/package.zip
(status 7)
Installation aborted.
I tried flash release Honeycomb 3.1 but go only error.
Thanks