GA6400 and GA7900 Root

[bmmcwhirt]

I posted my method over on googletvforums a whle back and been looking for someone to help me take this farther. To extract the data needed to begin work on custom roms. Getting no real help there I came across GTVHacker. Hopefully there are better results here.

I used a known exploit and some experimentation: http://www.googletvforum.org/forum/lg-i ... #post59086

Code: Select all

Ok, I have non-persistant root. That means root goes away when you turn off the TV and you have to do the process again, but apps you install stick.

Having root is VERY VERY VERY dangerous!!

What did I say?

Having root is VERY VERY VERY dangerous!!

It almost defiantly voids your warranty!!!
It is very possible to brick your TV to the point you have to buy a new one!!!!


First you have to enable developer options. From the home screen goto settings. 
Then to Customer Support. Goto build number and start clicking till it counts down to 0.
It will tell you you are now a developer.
Exit to the settings menu and goto applications.
From there select developer options.

These are the options I have:
protect usb storage OFF
Remote Debugging ON
Power menu bug reports ON
Allow mock locations ON
verify apps over USB OFF <==very important!!
ALL THE REST CAN BE DEFAULT
Now goto network and find out what your IP address is, at this point it is very important you are using WIRED ETHERNET! This process crashes out the wireless for a few and if that happens things start crashing.

Now I'll give credit, Im using modified directions from here:: Exploiting Key Signing for Root - GTVHacker The instructions for getting the needed software are there.
Launch Cydia Impactor
Connect your PC to Impactor by going to "Bridge" and then "Connect" in the file menu.
Input in the IP address of your Google TV in the "Bridge Connect" input box and press OK. (If successful, a dialog will prompt that you are connected.) Click OK.
Select "echo ro.kernel.qemu=1 >/data/local.prop" from the drop down menu and click start. If the command execute successfully, you may proceed, if not troubleshoot your connection and try again.
Select "# start telnetd as root on port 22" from the drop down menu and click start. If the command execute successfully, you may proceed, if not troubleshoot your connection and try again.
Open a Terminal window or command prompt and telnet to your TV port 22
Type 'id' to verify you are root.
Again, installed applications this way will stay. You will be able to telnet to your TV as long as it stays on, if you turn it off you have to repeat steps 1-7 to regain root.

I'm fairly new with Android so I have my TV, a JXD S7800B game tablet and a cheap cube tablet for experimenting on.

If you are good at building custom ROMs, not just patching them please contact me.

[bmmcwhirt]

Here is some additional information from /proc

Code: Select all

[email protected]:/proc # cat devices
Character devices:
  1 mem
  5 /dev/tty
  5 /dev/console
  5 /dev/ptmx
 10 misc
 13 input
 21 sg
 29 fb
 81 video4linux
 90 mtd
 91 spi
108 ppp
116 alsa
128 ptm
136 pts
140 aad
141 adec
142 afe
144 ci
145 de
146 demod
147 denc
148 dimm
149 fmt3d
150 frc
151 gfx
152 gpio
153 hdmi
154 iic
156 pe
158 sdec
159 se
160 ttx
161 vdec
163 sys
164 clk
165 monitor
166 ttyACM
168 mjpeg
180 usb
188 ttyUSB
189 usb_device
204 ttyAMA
249 roccat
250 hidraw
251 BaseRemoteCtl
252 usbmon
253 uio
254 rtc

Block devices:
  1 ramdisk
259 blkext
  7 loop
  8 sd
 31 mtdblock
 43 nbd
 65 sd
 66 sd
 67 sd
 68 sd
 69 sd
 70 sd
 71 sd
128 sd
129 sd
130 sd
131 sd
132 sd
133 sd
134 sd
135 sd
179 mmc
253 zram
254 device-mapper

Code: Select all

1|[email protected]:/proc # cat cpuinfo
Processor	: ARMv7 Processor rev 0 (v7l)
processor	: 0
BogoMIPS	: 1949.69

processor	: 1
BogoMIPS	: 1949.69

Features	: swp half thumb fastmult vfp edsp neon vfpv3 tls 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x2
CPU part	: 0xc09
CPU revision	: 0

Hardware	: EDEN
Revision	: 0000
Serial		: 0000000000000000

Code: Select all

[email protected]:/proc # cat meminfo
MemTotal:         710620 kB
MemFree:           22256 kB
Buffers:            5600 kB
Cached:           217572 kB
SwapCached:         1060 kB
Active:           285728 kB
Inactive:         286120 kB
Active(anon):     174624 kB
Inactive(anon):   174628 kB
Active(file):     111104 kB
Inactive(file):   111492 kB
Unevictable:         380 kB
Mlocked:               0 kB
HighTotal:         34816 kB
HighFree:            156 kB
LowTotal:         675804 kB
LowFree:           22100 kB
SwapTotal:        131068 kB
SwapFree:         127468 kB
Dirty:                 0 kB
Writeback:             0 kB
AnonPages:        348044 kB
Mapped:            78708 kB
Shmem:               196 kB
Slab:              19220 kB
SReclaimable:       6716 kB
SUnreclaim:        12504 kB
KernelStack:        8496 kB
PageTables:        12068 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:      486376 kB
Committed_AS:    8025720 kB
VmallocTotal:    1318912 kB
VmallocUsed:      278588 kB
VmallocChunk:     963588 kB

Code: Select all

[email protected]:/proc # cat consoles                                              
ttyAMA0              -W- (EC p  )  204:64

Code: Select all

[email protected]:/proc # cat diskstats                                             
   1       0 ram0 0 0 0 0 0 0 0 0 0 0 0
   1       1 ram1 0 0 0 0 0 0 0 0 0 0 0
   1       2 ram2 0 0 0 0 0 0 0 0 0 0 0
   1       3 ram3 0 0 0 0 0 0 0 0 0 0 0
   1       4 ram4 0 0 0 0 0 0 0 0 0 0 0
   1       5 ram5 0 0 0 0 0 0 0 0 0 0 0
   1       6 ram6 0 0 0 0 0 0 0 0 0 0 0
   1       7 ram7 0 0 0 0 0 0 0 0 0 0 0
   1       8 ram8 0 0 0 0 0 0 0 0 0 0 0
   1       9 ram9 0 0 0 0 0 0 0 0 0 0 0
   1      10 ram10 0 0 0 0 0 0 0 0 0 0 0
   1      11 ram11 0 0 0 0 0 0 0 0 0 0 0
   1      12 ram12 0 0 0 0 0 0 0 0 0 0 0
   1      13 ram13 0 0 0 0 0 0 0 0 0 0 0
   1      14 ram14 0 0 0 0 0 0 0 0 0 0 0
   1      15 ram15 0 0 0 0 0 0 0 0 0 0 0
   7       0 loop0 0 0 0 0 0 0 0 0 0 0 0
   7       1 loop1 0 0 0 0 0 0 0 0 0 0 0
   7       2 loop2 0 0 0 0 0 0 0 0 0 0 0
   7       3 loop3 0 0 0 0 0 0 0 0 0 0 0
   7       4 loop4 0 0 0 0 0 0 0 0 0 0 0
   7       5 loop5 0 0 0 0 0 0 0 0 0 0 0
   7       6 loop6 0 0 0 0 0 0 0 0 0 0 0
   7       7 loop7 0 0 0 0 0 0 0 0 0 0 0
  43       0 nbd0 0 0 0 0 0 0 0 0 0 0 0
  43       1 nbd1 0 0 0 0 0 0 0 0 0 0 0
  43       2 nbd2 0 0 0 0 0 0 0 0 0 0 0
  43       3 nbd3 0 0 0 0 0 0 0 0 0 0 0
  43       4 nbd4 0 0 0 0 0 0 0 0 0 0 0
  43       5 nbd5 0 0 0 0 0 0 0 0 0 0 0
  43       6 nbd6 0 0 0 0 0 0 0 0 0 0 0
  43       7 nbd7 0 0 0 0 0 0 0 0 0 0 0
  43       8 nbd8 0 0 0 0 0 0 0 0 0 0 0
  43       9 nbd9 0 0 0 0 0 0 0 0 0 0 0
  43      10 nbd10 0 0 0 0 0 0 0 0 0 0 0
  43      11 nbd11 0 0 0 0 0 0 0 0 0 0 0
  43      12 nbd12 0 0 0 0 0 0 0 0 0 0 0
  43      13 nbd13 0 0 0 0 0 0 0 0 0 0 0
  43      14 nbd14 0 0 0 0 0 0 0 0 0 0 0
  43      15 nbd15 0 0 0 0 0 0 0 0 0 0 0
 253       0 zram0 0 0 0 0 0 0 0 0 0 0 0
 179       0 mmcblk0 9173 5451 905638 50382 3040 4439 78920 91348 0 26853 141655
 179       1 mmcblk0p1 0 0 0 0 0 0 0 0 0 0 0
 179       2 mmcblk0p2 0 0 0 0 0 0 0 0 0 0 0
 179       3 mmcblk0p3 0 0 0 0 0 0 0 0 0 0 0
 179       4 mmcblk0p4 1 3 32 1 0 0 0 0 0 1 1
 179       5 mmcblk0p5 0 0 0 0 0 0 0 0 0 0 0
 179       6 mmcblk0p6 0 0 0 0 0 0 0 0 0 0 0
 179       7 mmcblk0p7 0 0 0 0 0 0 0 0 0 0 0
 179       8 mmcblk0p8 0 0 0 0 0 0 0 0 0 0 0
 179       9 mmcblk0p9 0 0 0 0 0 0 0 0 0 0 0
 179      10 mmcblk0p10 0 0 0 0 0 0 0 0 0 0 0
 179      11 mmcblk0p11 0 0 0 0 0 0 0 0 0 0 0
 179      12 mmcblk0p12 0 0 0 0 0 0 0 0 0 0 0
 179      13 mmcblk0p13 1 3 32 1 0 0 0 0 0 1 1
 179      14 mmcblk0p14 1 3 32 1 0 0 0 0 0 1 1
 179      15 mmcblk0p15 13 29 354 9 2 0 16 1 0 8 10
 179      16 mmcblk0p16 4280 457 450546 29409 12 9 168 17 0 11258 29404
 179      17 mmcblk0p17 0 0 0 0 0 0 0 0 0 0 0
 179      18 mmcblk0p18 0 0 0 0 0 0 0 0 0 0 0
 179      19 mmcblk0p19 0 0 0 0 0 0 0 0 0 0 0
 179      20 mmcblk0p20 4800 4280 448636 20718 2781 3042 65672 88320 0 19688 108978
 179      21 mmcblk0p21 0 0 0 0 0 0 0 0 0 0 0
 179      22 mmcblk0p22 30 126 1236 36 15 2 136 112 0 83 148
 179      23 mmcblk0p23 7 121 1024 43 0 0 0 0 0 27 42
 179      24 mmcblk0p24 0 0 0 0 0 0 0 0 0 0 0
 179      25 mmcblk0p25 0 0 0 0 0 0 0 0 0 0 0
 179      26 mmcblk0p26 1 3 32 2 1 0 8 0 0 2 2
 179      27 mmcblk0p27 19 93 890 21 219 116 2680 2333 0 1123 2354
 179      28 mmcblk0p28 1 31 256 11 0 0 0 0 0 11 11
 179      29 mmcblk0p29 16 302 2544 128 10 1270 10240 565 0 425 693
 179      30 mmcblk0p30 0 0 0 0 0 0 0 0 0 0 0
 179      31 mmcblk0p31 0 0 0 0 0 0 0 0 0 0 0
 179      32 mmcblk0p32 0 0 0 0 0 0 0 0 0 0 0
 179     160 mmcblk0boot1 2 0 16 1 0 0 0 0 0 0 0
 179      80 mmcblk0boot0 2 0 16 1 0 0 0 0 0 1 1

Code: Select all

1|[email protected]:/proc # cat kmsg                                                
<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpuset
<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 16 16:38:11 KST 2013
<4>[    0.000000] CPU: ARMv7 Processor [412fc090] revision 0 (ARMv7), cr=10c53c7d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: EDEN
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<7>[    0.000000] On node 0 totalpages: 184319
<7>[    0.000000] free_area_init_node: node 0, pgdat 80dbd180, node_mem_map 80fe3000
<7>[    0.000000]   Normal zone: 1472 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 174143 pages, LIFO batch:31
<7>[    0.000000]   HighMem zone: 2368 pages used for memmap
<7>[    0.000000]   HighMem zone: 6336 pages, LIFO batch:0
<6>[    0.000000] L310 cache controller enabled
<6>[    0.000000] l2x0: 16 ways, CACHE_ID 0x410000c5, AUX_CTRL 0x12470000, Cache size: 1048576 B
<6>[    0.000000] PERCPU: Embedded 8 pages/cpu @81ef2000 s10688 r8192 d13888 u32768
<7>[    0.000000] pcpu-alloc: s10688 r8192 d13888 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 180479
<5>[    0.000000] Kernel command line:  [email protected] [email protected] [email protected] ddr0mem=512M ddr1mem=512M pmem=0M malimem=0M umpmem=0M gfxmem=64M  ethaddr=C0:41:F6:8B:24:05 rev=1 console=ttyAMA0,115200n81 androidboot.console=ttyAMA0 bver=0.01.82 chip=L9B1 platform=COSMO nfc=0x2 lpj=974848 ace=L9B1 quiet loglevel=0 lginit=/dev/mmcblk0p0 ip=none modelopt=11000000000 portProtection rootwait panic=1
<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] allocated 3932160 bytes of page_cgroup
<6>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
<6>[    0.000000] Memory: 350MB 320MB 15MB 34MB = 719MB total
<5>[    0.000000] Memory: 710136k/710136k available, 43528k reserved, 34816K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000]     vmalloc : 0xae800000 - 0xff000000   (1288 MB)
<5>[    0.000000]     lowmem  : 0x80000000 - 0xae000000   ( 736 MB)
<5>[    0.000000]     pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
<5>[    0.000000]     modules : 0x7f000000 - 0x7fe00000   (  14 MB)
<5>[    0.000000]       .text : 0x80008000 - 0x80c42784   (12522 kB)
<5>[    0.000000]       .init : 0x80c43000 - 0x80c8f9c0   ( 307 kB)
<5>[    0.000000]       .data : 0x80c90000 - 0x80dc0138   (1217 kB)
<5>[    0.000000]        .bss : 0x80dc015c - 0x80fe2120   (2184 kB)
<6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:160
<6>[    0.000000] sched_clock: 32 bits at 198MHz, resolution 5ns, wraps every 21691ms
<6>[    0.000065] Calibrating delay loop (skipped) preset value.. 1949.69 BogoMIPS (lpj=974848)
<6>[    0.000087] pid_max: default: 32768 minimum: 301
<6>[    0.000232] Mount-cache hash table entries: 512
<6>[    0.000912] Initializing cgroup subsys debug
<6>[    0.000927] Initializing cgroup subsys cpuacct
<6>[    0.000938] Initializing cgroup subsys memory
<6>[    0.000992] Initializing cgroup subsys devices
<6>[    0.001004] Initializing cgroup subsys freezer
<6>[    0.001050] CPU: Testing write buffer coherency: ok
<6>[    0.001098] ftrace: allocating 23846 entries in 70 pages
<6>[    0.051057] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[    0.051123] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<6>[    0.051219] Setting up static identity map for 0x731be0 - 0x731c14
<4>[    0.059529] CPU1: Booted secondary processor
<6>[    0.059560] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<2>[    0.059585] CPU1: Unknown IPI message 0x1
<6>[    0.059605] Brought up 2 CPUs
<6>[    0.059616] SMP: Total of 2 processors activated (3899.39 BogoMIPS).
<6>[    0.063878] NET: Registered protocol family 16
<6>[    0.067670] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
<6>[    0.067685] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[    0.067868] Serial: AMBA PL011 UART driver
<6>[    0.067937] uart0: ttyAMA0 at MMIO 0xfe000000 (irq = 32) is a PL011 rev2
<6>[    0.068017] console [ttyAMA0] enabled
<6>[    0.068190] uart1: ttyAMA1 at MMIO 0xfe100000 (irq = 33) is a PL011 rev2
<6>[    0.068358] uart2: ttyAMA2 at MMIO 0xfe200000 (irq = 34) is a PL011 rev2
<6>[    0.092571] bio: create slab <bio-0> at 0
<6>[    0.093067] pl08xdmac dmac: initialized 8 virtual memcpy channels
<6>[    0.093083] pl08xdmac dmac: initialized 6 virtual slave channels
<6>[    0.094986] pl08xdmac dmac: DMA: PL080 rev0 at 0xff200000 irq 48
<5>[    0.095694] SCSI subsystem initialized
<6>[    0.095729] ssp-pl022 spi0: ARM PL022 driver, device ID: 0x00041022
<6>[    0.095761] pl022: mapped registers from 0xfe800000 to ae818000
<6>[    0.096264] ssp-pl022 spi1: ARM PL022 driver, device ID: 0x00041022
<6>[    0.096284] pl022: mapped registers from 0xfe900000 to ae81a000
<6>[    0.097157] usbcore: registered new interface driver usbfs
<6>[    0.097410] usbcore: registered new interface driver hub
<6>[    0.097633] usbcore: registered new device driver usb
<6>[    0.098074] Linux video capture interface: v2.00
<6>[    0.098844] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[    0.099973] cfg80211: Calling CRDA to update world regulatory domain
<6>[    0.100982] Switching to clocksource timer1
<6>[    0.120131] NET: Registered protocol family 2
<6>[    0.120320] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.120823] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[    0.122417] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>[    0.123391] TCP: Hash tables configured (established 131072 bind 65536)
<6>[    0.123405] TCP: reno registered
<6>[    0.123421] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.123452] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.123691] NET: Registered protocol family 1
<6>[    0.124008] RPC: Registered named UNIX socket transport module.
<6>[    0.124019] RPC: Registered udp transport module.
<6>[    0.124053] RPC: Registered tcp transport module.
<6>[    0.124063] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[    0.124249] Trying to unpack rootfs image as initramfs...
<6>[    0.136180] Freeing initrd memory: 180K
<4>[    0.138760] highmem bounce pool size: 64 pages
<6>[    0.150393] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    0.150727] Registering unionfs 2.5.11 (for 3.3.0-rc3)
<6>[    0.152317] NTFS driver 2.1.30 [Flags: R/O].
<6>[    0.152687] fuse init (API version 7.18)
<6>[    0.153400] JFS: nTxBlock = 5549, nTxLock = 44394
<6>[    0.159610] msgmni has been set to 1319
<6>[    0.161190] io scheduler noop registered
<6>[    0.161471] io scheduler cfq registered (default)
<6>[    0.161818] uart-pl011 uart0: no DMA platform data
<6>[    0.161832] uart-pl011 uart1: no DMA platform data
<6>[    0.161858] uart-pl011 uart2: DMA channel TX dma1chan5
<6>[    0.161870] uart-pl011 uart2: DMA channel RX dma1chan4
<4>[    0.162223] lg115x_ion_probe
<6>[    0.169542] brd: module loaded
<6>[    0.173697] loop: module loaded
<6>[    0.175003] nbd: registered device at major 43
<4>[    0.183526] Realtek RTL8201F Fast Ethernet PHY driver
<6>[    0.183652] tun: Universal TUN/TAP device driver, 1.6
<6>[    0.183662] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[    0.183799] PPP generic driver version 2.4.2
<6>[    0.184091] PPP BSD Compression module registered
<6>[    0.184101] PPP Deflate Compression module registered
<6>[    0.184621] PPP MPPE Compression module registered
<6>[    0.184633] NET: Registered protocol family 24
<6>[    0.184803] usbcore: registered new interface driver asix
<6>[    0.184965] usbcore: registered new interface driver cdc_ether
<6>[    0.185125] usbcore: registered new interface driver net1080
<6>[    0.185255] usbcore: registered new interface driver cdc_subset
<6>[    0.185383] usbcore: registered new interface driver zaurus
<6>[    0.185536] usbcore: registered new interface driver cdc_ncm
<6>[    0.186348] usbcore: registered new interface driver cdc_acm
<6>[    0.186359] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[    0.186501] usbcore: registered new interface driver libusual
<6>[    0.186782] usbcore: registered new interface driver usbserial
<6>[    0.186919] usbcore: registered new interface driver usbserial_generic
<6>[    0.187096] USB Serial support registered for generic
<6>[    0.187106] usbserial: USB Serial Driver core
<6>[    0.187239] usbcore: registered new interface driver pl2303
<6>[    0.187367] USB Serial support registered for pl2303
<6>[    0.187890] mousedev: PS/2 mouse device common for all mice
<6>[    0.188258] usbcore: registered new interface driver xpad
<6>[    0.188395] usbcore: registered new interface driver usb_acecad
<6>[    0.188533] usbcore: registered new interface driver aiptek
<6>[    0.188667] usbcore: registered new interface driver gtco
<6>[    0.188799] usbcore: registered new interface driver hanwang
<6>[    0.188939] usbcore: registered new interface driver kbtab
<6>[    0.189169] usbcore: registered new interface driver wacom
<6>[    0.190174] rtc-test rtc-test.0: rtc core: registered test as rtc0
<6>[    0.190487] rtc-test rtc-test.1: rtc core: registered test as rtc1
<6>[    0.190769] lirc_dev: IR Remote Control driver registered, major 251 
<6>[    0.190780] IR NEC protocol handler initialized
<6>[    0.190788] IR RC5(x) protocol handler initialized
<6>[    0.190795] IR RC6 protocol handler initialized
<6>[    0.190802] IR JVC protocol handler initialized
<6>[    0.190809] IR Sony protocol handler initialized
<6>[    0.190816] IR RC5 (streamzap) protocol handler initialized
<6>[    0.190824] IR SANYO protocol handler initialized
<6>[    0.190831] IR MCE Keyboard/mouse protocol handler initialized
<6>[    0.190843] IR LIRC bridge handler initialized
<6>[    0.191008] usbcore: registered new interface driver uvcvideo
<6>[    0.191018] USB Video Class driver (1.1.1)
<6>[    0.191593] sp805-wdt wdog: registration successful
<6>[    0.192405] device-mapper: uevent: version 1.0.3
<6>[    0.192746] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
<6>[    0.193263] sdhci: Secure Digital Host Controller Interface driver
<6>[    0.193273] sdhci: Copyright(c) Pierre Ossman
<6>[    0.193365] LG115X MMC/SDIO:
<6>[    0.193368] 	HC Vendor Version Number: 53
<6>[    0.193377] 	HC SPEC Version Number: 2
<6>[    0.195092] mmc0: driver initialized... IRQ: 50, Base addr 0xaeb68000
<6>[    0.203105] usbcore: registered new interface driver usbhid
<6>[    0.203116] usbhid: USB HID core driver
<6>[    0.203674] zram: Created 1 device(s) ...
<6>[    0.204425] ashmem: initialized
<6>[    0.204566] logger: created 256K log 'log_main'
<6>[    0.204703] logger: created 256K log 'log_events'
<6>[    0.204847] logger: created 256K log 'log_radio'
<6>[    0.204995] logger: created 256K log 'log_system'
<4>[    0.205423] CHIP_REV=0x09B1 ACE_REV=0x09B1 CHIP_PLT=0x0002
<4>[    0.205439] [FB] REG BASE = 0xc0025100
<4>[    0.205468] OS mem 34 MB
<4>[    0.205481] <!> mem param: kernel/ddr0/ddr1/ddr2 02200000/[email protected]/[email protected]/[email protected]
<4>[    0.205501] DDR0 Alloc Range : 2e000000~378b3000 (   25 MB free)
<4>[    0.205511] DDR1 Alloc Range : 70000000~71ee6000 (   97 MB free)
<4>[    0.205521] DDR2 Alloc Range : 80000000~87f0a000 (    8 MB free)
<4>[    0.205556] ---------------------------------------------------------------------------------------------------------------
<4>[    0.205565] Name                ,  org base,   org size,..,ALLOC BASE,ALLOC  END,alloc size MB,alloc base MB,~,alloc end MB
<4>[    0.205584] gstMemCfgADEC[0]    ,0x2e000000,+0x01400000,=>,0x2e000000,0x2f400000,  20MB+   0kB, 736MB+   0kB,~, 756MB+   0kB
<4>[    0.205601] gMemCfgSDECGPB[1]   ,0x2f400000,+0x00800000,=>,0x2f400000,0x2fc00000,   8MB+   0kB, 756MB+   0kB,~, 764MB+   0kB
<4>[    0.205617] gstBufMemCfgTTXRev[1,0x2fc00000,+0x00100000,=>,0x2fc00000,0x2fd00000,   1MB+   0kB, 764MB+   0kB,~, 765MB+   0kB
<4>[    0.205633] gMemCfgSE           ,0x2fd00000,+0x00200000,=>,0x2fd00000,0x2ff00000,   2MB+   0kB, 765MB+   0kB,~, 767MB+   0kB
<4>[    0.205649] gMemCfgSE_TZFW      ,0x2ff00000,+0x00100000,=>,0x2ff00000,0x30000000,   1MB+   0kB, 767MB+   0kB,~, 768MB+   0kB
<4>[    0.205665] sMemCfgGPU          ,0x30000000,+0x03a00000,=>,0x30000000,0x33a00000,  58MB+   0kB, 768MB+   0kB,~, 826MB+   0kB
<4>[    0.205681] gMemCfgGfx          ,0x33a00000,+0x00100000,=>,0x33a00000,0x33b00000,   1MB+   0kB, 826MB+   0kB,~, 827MB+   0kB
<4>[    0.205697] gMemCfgCvd[1]       ,0x33b00000,+0x00500000,=>,0x33b00000,0x34000000,   5MB+   0kB, 827MB+   0kB,~, 832MB+   0kB
<4>[    0.205713] gMemCfgFBDev[0]     ,0x35200000,+0x01fa5000,=>,0x35200000,0x371a5000,  31MB+ 660kB, 850MB+   0kB,~, 881MB+ 660kB
<4>[    0.205730] gMemCfgFBDev[1]     ,0x371a5000,+0x00709000,=>,0x371a5000,0x378ae000,   7MB+  36kB, 881MB+ 660kB,~, 888MB+ 696kB
<4>[    0.205746] gMemCfgFBDev[2]     ,0x378ae000,+0x00002000,=>,0x378ae000,0x378b0000,   0MB+   8kB, 888MB+ 696kB,~, 888MB+ 704kB
<4>[    0.205762] gMemCfgFBHdr[0]     ,0x378b0000,+0x00000020,=>,0x378b0000,0x378b0020,   0MB+   0kB, 888MB+ 704kB,~, 888MB+ 704kB
<4>[    0.205778] gMemCfgFBHdr[1]     ,0x378b1000,+0x00000020,=>,0x378b1000,0x378b1020,   0MB+   0kB, 888MB+ 708kB,~, 888MB+ 708kB
<4>[    0.205793] gMemCfgFBHdr[2]     ,0x378b2000,+0x00000020,=>,0x378b2000,0x378b2020,   0MB+   0kB, 888MB+ 712kB,~, 888MB+ 712kB
<4>[    0.205809] g_stMemCfgMJPEG     ,0x378b3000,+0x00000000,=>,0x378b3000,0x378b3000,   0MB+   0kB, 888MB+ 716kB,~, 888MB+ 716kB
<4>[    0.205821] ---------------------------------------------------------------------------------------------------------------
<4>[    0.205830] Name                ,  org base,   org size,..,ALLOC BASE,ALLOC  END,alloc size MB,alloc base MB,~,alloc end MB
<4>[    0.205847] gMemCfgVdec[1]      ,0x70000000,+0x01ee6000,=>,0x70000000,0x71ee6000,  30MB+ 920kB,1792MB+   0kB,~,1822MB+ 920kB
<4>[    0.205859] ---------------------------------------------------------------------------------------------------------------
<4>[    0.205867] Name                ,  org base,   org size,..,ALLOC BASE,ALLOC  END,alloc size MB,alloc base MB,~,alloc end MB
<4>[    0.205884] gMemCfgDe[2]        ,0x80000000,+0x0777c000,=>,0x80000000,0x8777c000, 119MB+ 496kB,2048MB+   0kB,~,2167MB+ 496kB
<4>[    0.205900] gMemCfgFBDev[3]     ,0x87f00000,+0x00009000,=>,0x87f00000,0x87f09000,   0MB+  36kB,2175MB+   0kB,~,2175MB+  36kB
<4>[    0.205921] gMemCfgFBHdr[3]     ,0x87f09000,+0x00000020,=>,0x87f09000,0x87f09020,   0MB+   0kB,2175MB+  36kB,~,2175MB+  36kB
<4>[    0.206185] sys    ] sys device initialized
<4>[    0.207899] iic    ] i2c device initialized
<4>[    0.207904] de     ] [de] done probe
<4>[    0.210010] de     ] [de] platform register done
<4>[    0.210442] de     ] de device initialized
<4>[    0.210788] fmt3d  ] fmt3d device initialized
<4>[    0.212391] vdec   ] [VDEC] VDEC_Init:526:, adae9000, sz, 00000044
<4>[    0.216932] vdec   ] [VDEC_K][MEM] SHM:0x71CC6000/0x100000, CPB:0x70CC6000/0x1000000, DPB:0x72000000/0x6000000, VDEC_KTOP_Init
<4>[    0.220438] vdec   ] [VDEC] vdec device initialized :: VDEC_IRQ(80), MCU_IRQ(81)
<4>[    0.230596] vdec   ] (MCU)[DBG] main() - MCU initialisation complete
<4>[    0.237063] ci     ] ci device initialized
<4>[    0.237074] kdrvcore] TTX_Init entered 
<4>[    0.237257] ttx    ] ttx device initialized
<4>[    0.238158] [fb] GPU CLOCK [old ] 0014: 0x00800000 0084: 0x00000070
<4>[    0.238170] [fb] GPU CLOCK [400M] 0014:0x00600000 0084:0x00000070
<4>[    0.240776] kdrvcore] <!> BASE_Init : END
<6>[    0.241739] u32 classifier
<6>[    0.241747]     Actions configured
<6>[    0.241758] Netfilter messages via NETLINK v0.30.
<6>[    0.241775] nfnl_acct: registering with nfnetlink.
<6>[    0.241830] nf_conntrack version 0.5.0 (11098 buckets, 44392 max)
<6>[    0.242545] ctnetlink v0.93: registering with nfnetlink.
<6>[    0.242591] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[    0.242601] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[    0.243150] xt_time: kernel timezone is -0000
<6>[    0.243456] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    0.243622] arp_tables: (C) 2002 David S. Miller
<6>[    0.243672] TCP: cubic registered
<6>[    0.243680] Initializing XFRM netlink socket
<6>[    0.244532] NET: Registered protocol family 10
<6>[    0.245432] Mobile IPv6
<6>[    0.245468] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    0.245611] IPv6 over IPv4 tunneling driver
<6>[    0.246480] NET: Registered protocol family 17
<6>[    0.246514] NET: Registered protocol family 15
<6>[    0.246524] lib80211: common routines for IEEE802.11 drivers
<7>[    0.246534] lib80211_crypt: registered algorithm 'NULL'
<6>[    0.246900] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
<3>[    0.247576] otg_wakelock_init: No USB transceiver found
<6>[    0.247616] rtc-test rtc-test.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
<6>[    0.247684] ALSA device list:
<6>[    0.247692]   No soundcards found.
<6>[    0.248088] Freeing init memory: 304K
<4>[    0.252285] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<6>[    0.260367] mmc0: new high speed MMC card at address 0001
<6>[    0.261011] mmcblk0: mmc0:0001 008G92 7.28 GiB 
<6>[    0.261287] mmcblk0boot0: mmc0:0001 008G92 partition 1 4.00 MiB
<6>[    0.261478] mmcblk0boot1: mmc0:0001 008G92 partition 2 4.00 MiB
<4>[    0.262959] LG EMMC PARTITION MAP! 
<4>[    0.263326]  p01 (secureboot  ) 0x000000000000-0x000000040000 : "secureboot"
<4>[    0.263345]  p02 (boot        ) 0x000000040000-0x000000100000 : "boot"
<4>[    0.263361]  p03 (partinfo    ) 0x000000100000-0x000000140000 : "partinfo"
<4>[    0.263376]  p04 (recovery    ) 0x000000140000-0x000004140000 : "recovery"
<4>[    0.263390]  p05 (crc32info   ) 0x000004140000-0x000004180000 : "crc32info"
<4>[    0.263405]  p06 (rootfs      ) 0x000004180000-0x000005180000 : "rootfs"
<4>[    0.263420]  p07 (model       ) 0x000005180000-0x0000051c0000 : "model"
<4>[    0.263434]  p08 (cfginfo     ) 0x0000051c0000-0x000005200000 : "cfginfo"
<4>[    0.263448]  p09 (logo        ) 0x000005200000-0x000005280000 : "logo"
<4>[    0.263462]  p10 (tzfw        ) 0x000005280000-0x000005380000 : "tzfw"
<4>[    0.263476]  p11 (kernel      ) 0x000005400000-0x000005c00000 : "kernel"
<4>[    0.263491]  p12 (lgapp       ) 0x000005c00000-0x000007c00000 : "lgapp"
<4>[    0.263505]  p13 (sedata      ) 0x000007c00000-0x000007c80000 : "sedata"
<4>[    0.263519]  p14 (predata     ) 0x000007c80000-0x000008c80000 : "predata"
<4>[    0.263533]  p15 (irdb        ) 0x000008c80000-0x000009480000 : "irdb"
<4>[    0.263547]  p16 (system      ) 0x000009480000-0x000047480000 : "system"
<4>[    0.263561]  p17 (boot        ) 0x000047480000-0x000047540000 : "boot"
<4>[    0.263575]  p18 (tzfw        ) 0x000047540000-0x000047640000 : "tzfw"
<4>[    0.263589]  p19 (dimg        ) 0x000047dc0000-0x0000513c0000 : "dimg"
<4>[    0.263603]  p20 (data        ) 0x0000513c0000-0x0001913c0000 : "data"
<4>[    0.263617]  p21 (chrome      ) 0x0001913c0000-0x0001b13c0000 : "chrome"
<4>[    0.263632]  p22 (cache       ) 0x0001b13c0000-0x0001d13c0000 : "cache"
<4>[    0.263646]  p23 (sestore     ) 0x0001d13c0000-0x0001d1440000 : "sestore"
<4>[    0.263661]  p24 (widevine    ) 0x0001d1440000-0x0001d14c0000 : "widevine"
<4>[    0.263675]  p25 (idfile      ) 0x0001d14c0000-0x0001d1540000 : "idfile"
<4>[    0.263689]  p26 (misc        ) 0x0001d1540000-0x0001d1580000 : "misc"
<4>[    0.263703]  p27 (sysd        ) 0x0001d1580000-0x0001d1a80000 : "sysd"
<4>[    0.263717]  p28 (nback       ) 0x0001d1a80000-0x0001d1b00000 : "nback"
<4>[    0.263732]  p29 (nvram       ) 0x0001d1b00000-0x0001d1f00000 : "nvram"
<4>[    0.263746]  p30 (hist        ) 0x0001d1f00000-0x0001d1f80000 : "hist"
<4>[    0.263760]  p31 (macadr      ) 0x0001d1f80000-0x0001d1fc0000 : "macadr"
<4>[    0.263774]  p32 (env_nvm     ) 0x0001d1fc0000-0x0001d2000000 : "env_nvm"
<6>[    0.273323]  mmcblk0boot1: unknown partition table
<6>[    0.275289]  mmcblk0boot0: unknown partition table
<6>[    0.365369] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: (null)
<7>[    0.825086] EXT4-fs (mmcblk0p20): ext4_orphan_cleanup: deleting unreferenced inode 124966
<7>[    0.825374] EXT4-fs (mmcblk0p20): ext4_orphan_cleanup: deleting unreferenced inode 124798
<6>[    0.825527] EXT4-fs (mmcblk0p20): 2 orphan inodes deleted
<6>[    0.825538] EXT4-fs (mmcblk0p20): recovery complete
<6>[    0.832507] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<6>[    0.849100] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/sdhci-lg1152.0/by-name/data
<6>[    0.907277] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: (null)
<6>[    0.919517] EXT4-fs (mmcblk0p22): recovery complete
<6>[    0.920117] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<6>[    0.926081] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/sdhci-lg1152.0/by-name/cache
<6>[    0.941928] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: (null)
<6>[    0.958353] EXT4-fs (mmcblk0p27): recovery complete
<6>[    0.958947] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts: (null)
<6>[    0.965229] EXT4-fs (mmcblk0p15): recovery complete
<6>[    0.965837] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: (null)
<3>[    1.272195] kdrv_lg1152: exports duplicate symbol DE_REG_L9_SetPeTestPatternGen (owned by kernel)
<4>[    1.353712] Mali<2>: Inserting Mali v20 device driver. 
<4>[    1.353730] Mali<2>: Compiled: Jul  9 2013, time: 15:30:04.
<4>[    1.353742] Mali<2>: Driver revision: r3p2-01rel1
<4>[    1.353751] Mali<2>: Driver git Changed-Id: 98526551f107c9a4c2e124b183b0a9647472f00f
<4>[    1.353765] Mali<2>: mali_module_init() registering device
<4>[    1.354568] Mali<2>: mali_module_init() registering driver
<4>[    1.354655] Mali<2>: mali_probe(): Called for platform device mali-utgard
<4>[    1.354677] Mali<2>: Memory system initializing
<4>[    1.354982] Mali<2>: Declare dma memory for mali pagetable(0x2c000000~0x2d000000)
<4>[    1.355003] Mali<2>: Using device defined memory settings (dedicated: [email protected], shared: 0x18000000)
<4>[    1.355026] Mali<2>: Mali OS memory allocator created with max allocation size of 0x18000000 bytes, cpu_usage_adjust 0x00000000
<4>[    1.355070] Mali<2>: Using device defined frame buffer settings ([email protected])
<4>[    1.355085] Mali<2>: Memory Validator installed for Mali physical address base=0x35200000, size=0x02E00000
<4>[    1.355106] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0
<4>[    1.355117] Mali<2>: Mali PP: Base address of PP core: 0xc0015000
<4>[    1.355212] Mali<2>: Found Mali GPU Mali-400 MP r1p1
<4>[    1.355732] Mali<2>: Mali L2 cache: Creating Mali L2 cache: Mali_L2
<4>[    1.355772] Mali<2>: Mali MMU: Creating Mali MMU: Mali_GP_MMU
<4>[    1.355806] Mali<2>: Mali GP: Creating Mali GP core: Mali_GP
<4>[    1.355850] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP0_MMU
<4>[    1.355882] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0
<4>[    1.355893] Mali<2>: Mali PP: Base address of PP core: 0xc0015000
<4>[    1.355925] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP1_MMU
<4>[    1.355963] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP1
<4>[    1.355974] Mali<2>: Mali PP: Base address of PP core: 0xc0017000
<4>[    1.356020] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP2_MMU
<4>[    1.356083] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP2
<4>[    1.356095] Mali<2>: Mali PP: Base address of PP core: 0xc0019000
<4>[    1.356130] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP3_MMU
<4>[    1.356169] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP3
<4>[    1.356181] Mali<2>: Mali PP: Base address of PP core: 0xc001b000
<4>[    1.356213] Mali<2>: 4+0 PP cores initialized
<4>[    1.356231] Mali<2>: Mali GPU Utilization: No utilization handler installed
<4>[    1.357505] Mali<2>: mali_probe(): Successfully initialized driver for platform device mali-utgard
<4>[    1.358019] Mali: Mali device driver loaded
<3>[    1.453671] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
<3>[    1.455097] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<6>[    2.095597] Adding 131068k swap on /dev/block/zram0.  Priority:-1 extents:1 across:131068k SS
<4>[    2.436336] Mali<2>: Session started
<6>[    3.007352] input: Remote Key as /devices/virtual/input/input0
<4>[    3.008448] vdec   ] [VDEC] device opened (161:0) by client pid/tgid 1315 1107
<4>[    3.009743] adec   ] ATSC GCD SELECTED
<4>[    3.014422] de     ] device opened (145:0)
<4>[    3.014634] afe    ] Main CVD Initialize Start... DTVSoC Chip Verstion [0x9b1]
<4>[    3.027359] afe    ] CVD Thread [1380]
<4>[    3.027403] afe    ] Vport Version : [20110511]
<4>[    3.037335] de     ] device opened (145:0)
<4>[    3.061509] afe    ] ADC Thread [1392]
<4>[    3.061722] ttx    ] TTX_Open entered 
<4>[    3.061733] ttx    ] device opened (160:0)
<4>[    3.061748] ttx    ] CC init
<4>[    3.061782] ttx    ] CC_L9B0_HWInitialize done
<4>[    3.061793] ttx    ] CC_L9B0_SetInputFormat input : 0
<4>[    3.061802] ttx    ] CC_L9B0_SetInputFormat done
<4>[    3.061852] ttx    ] TTX_CC_InitDataMemory done base addr [0x2fc00000] size [0x100000] 
<4>[    3.061865] ttx    ] CC_L9B0_SetInputFormat input : 1
<4>[    3.061875] ttx    ] CC_L9B0_SetInputFormat done
<4>[    3.061941] afe    ] Set to ANALOGCC
<4>[    3.062111] afe    ] CHB CVD Initialize Start...
<4>[    3.062122] afe    ] L9B0 CHB Init bypass
<4>[    3.062302] afe    ] Vport Version : [20110511]
<4>[    3.062623] fmt3d  ] device opened (149:0)
<4>[    3.075282] adec   ] DSP1 to Ready : Present  Codec Ver. = 0x1606(6), spdifMain = 0
<4>[    3.076065] de     ] Loading DE_FW_ROM_IRM
<4>[    3.078096] de     ] Loading DE_FW_ROM_DRM
<4>[    3.087364] de     ] Loading DE_FW_ROM_ADR5
<4>[    3.091167]  DE SIZE = 123715584
<4>[    3.091191] de     ] DE_PWM_Init : enter
<4>[    3.091206] de     ] DE_PWM_Init : done.
<4>[    3.098136] hdmi   ]  ACE HDMI L9 B1/B2 
<4>[    3.101465] hdmi   ] HDMI_L9Bx_EnableInterrupt
<4>[    3.110008] PE_D3D_Init : done
<4>[    3.110145] afe    ] OK PCMode Table Copied
<4>[    3.110156] afe    ] PC Mode Table Size is [99]
<4>[    3.110219] adec   ] DSP0 to Ready : MULTI    Codec Ver. = 0x1158(type = 0(35))
<4>[    3.114087]  DE SIZE = 123715584
<4>[    3.114105] de     ] DE_PWM_Init : enter
<4>[    3.114114] de     ] DE_PWM_Init : done.
<6>[    3.127988] input: LGE M-RCU as /devices/virtual/input/input1
<6>[    3.131308] input: LGE M-RCU as /devices/virtual/input/input2
<6>[    3.133718] input: LGE M-RCU as /devices/virtual/input/input3
<6>[    3.136158] input: LGE M-RCU as /devices/virtual/input/input4
<6>[    3.139768] input: LGE M-RCU as /devices/virtual/input/input5
<6>[    3.142272] input: LGE M-RCU as /devices/virtual/input/input6
<4>[    4.576278] de     ] win_id[0] in_port[3] main/sub[3/0] (in_port => MVI/CVD/ADC/HDMI:0/1/2/3)
<4>[    4.576296] de     ] cvi_mux_sel[0] exta_sel[0] extb_sel[1]
<4>[    4.576834] hdmi   ]  HDMI disconnection =0 
<4>[    4.577830] afe    ] ### Setting Color System to [0x1] ###
<4>[    4.681099] adec   ] SetADCPortNumber : ADC Port = 4
<4>[    4.903117] adec   ] SetADCPortNumber : ADC Port = 2
<4>[    4.941723] hdmi   ]  HDMI disconnection =1 
<4>[    4.982606] hdmi   ]  HDMI disconnection =2 
<4>[    6.151126] LG115x EMAC-AHB Fast Ethernet MAC driver
<6>[    6.151606] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    6.185888] LG115x EMAC-AHB mdc/mdio bus: probed
<6>[    6.185920] LG115x EMAC-AHB emac-ahb.0: (unregistered net_device): PHY attached: RTL8201F Fast Ethernet @ address 2 using irq -1
<6>[    6.217904] LG115x EHCI HCD ehci.0: LG115x EHCI HC
<6>[    6.227231] LG115x EHCI HCD ehci.0: new USB bus registered, assigned bus number 1
<6>[    6.248095] LG115x EHCI HCD ehci.0: irq 52, io mem 0xfb000000
<6>[    6.254084] LG115x EHCI HCD ehci.0: USB 2.0 started, EHCI 1.00
<6>[    6.254185] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    6.254230] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    6.254288] usb usb1: Product: LG115x EHCI HC
<6>[    6.254299] usb usb1: Manufacturer: Linux 3.4.5 ehci_hcd
<6>[    6.254308] usb usb1: SerialNumber: ehci.0
<6>[    6.263985] hub 1-0:1.0: USB hub found
<6>[    6.264018] hub 1-0:1.0: 1 port detected
<6>[    6.265170] LG115x EHCI HCD ehci.1: LG115x EHCI HC
<6>[    6.266621] LG115x EHCI HCD ehci.1: new USB bus registered, assigned bus number 2
<6>[    6.287183] LG115x EHCI HCD ehci.1: irq 54, io mem 0xfc000000
<6>[    6.293062] LG115x EHCI HCD ehci.1: USB 2.0 started, EHCI 1.00
<6>[    6.293172] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    6.293186] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    6.293197] usb usb2: Product: LG115x EHCI HC
<6>[    6.293206] usb usb2: Manufacturer: Linux 3.4.5 ehci_hcd
<6>[    6.293215] usb usb2: SerialNumber: ehci.1
<6>[    6.301816] hub 2-0:1.0: USB hub found
<6>[    6.301892] hub 2-0:1.0: 1 port detected
<6>[    6.305096] LG115x EHCI HCD ehci.2: LG115x EHCI HC
<6>[    6.307520] LG115x EHCI HCD ehci.2: new USB bus registered, assigned bus number 3
<6>[    6.328096] LG115x EHCI HCD ehci.2: irq 56, io mem 0xf8000000
<6>[    6.334062] LG115x EHCI HCD ehci.2: USB 2.0 started, EHCI 1.00
<6>[    6.334140] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    6.334154] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    6.334166] usb usb3: Product: LG115x EHCI HC
<6>[    6.334174] usb usb3: Manufacturer: Linux 3.4.5 ehci_hcd
<6>[    6.334183] usb usb3: SerialNumber: ehci.2
<6>[    6.343395] hub 3-0:1.0: USB hub found
<6>[    6.343421] hub 3-0:1.0: 1 port detected
<6>[    6.354574] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[    6.354748] LG115x OHCI HCD ohci.0: LG115x OHCI HC
<6>[    6.359379] LG115x OHCI HCD ohci.0: new USB bus registered, assigned bus number 4
<6>[    6.359466] LG115x OHCI HCD ohci.0: irq 51, io mem 0xfb004000
<6>[    6.414183] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
<6>[    6.414200] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    6.414211] usb usb4: Product: LG115x OHCI HC
<6>[    6.414220] usb usb4: Manufacturer: Linux 3.4.5 ohci_hcd
<6>[    6.414267] usb usb4: SerialNumber: ohci.0
<6>[    6.424612] hub 4-0:1.0: USB hub found
<6>[    6.424644] hub 4-0:1.0: 1 port detected
<6>[    6.426547] LG115x OHCI HCD ohci.1: LG115x OHCI HC
<6>[    6.432285] LG115x OHCI HCD ohci.1: new USB bus registered, assigned bus number 5
<6>[    6.432371] LG115x OHCI HCD ohci.1: irq 53, io mem 0xfc004000
<6>[    6.487362] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
<6>[    6.487378] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    6.487390] usb usb5: Product: LG115x OHCI HC
<6>[    6.487398] usb usb5: Manufacturer: Linux 3.4.5 ohci_hcd
<6>[    6.487407] usb usb5: SerialNumber: ohci.1
<6>[    6.499570] hub 5-0:1.0: USB hub found
<6>[    6.499602] hub 5-0:1.0: 1 port detected
<6>[    6.504492] LG115x OHCI HCD ohci.2: LG115x OHCI HC
<6>[    6.510119] LG115x OHCI HCD ohci.2: new USB bus registered, assigned bus number 6
<6>[    6.510218] LG115x OHCI HCD ohci.2: irq 55, io mem 0xf8004000
<6>[    6.565231] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
<6>[    6.565248] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    6.565259] usb usb6: Product: LG115x OHCI HC
<6>[    6.565268] usb usb6: Manufacturer: Linux 3.4.5 ohci_hcd
<6>[    6.565276] usb usb6: SerialNumber: ohci.2
<6>[    6.566118] usb 1-1: new high-speed USB device number 2 using LG115x EHCI HCD
<6>[    6.570953] hub 6-0:1.0: USB hub found
<6>[    6.570997] hub 6-0:1.0: 1 port detected
<6>[    6.580893] Initializing USB Mass Storage driver...
<6>[    6.583463] usbcore: registered new interface driver usb-storage
<6>[    6.583478] USB Mass Storage support registered.
<6>[    6.680548] usb 1-1: New USB device found, idVendor=0424, idProduct=2512
<6>[    6.680569] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<6>[    6.689454] hub 1-1:1.0: USB hub found
<6>[    6.689650] hub 1-1:1.0: 2 ports detected
<6>[    6.796092] usb 3-1: new high-speed USB device number 2 using LG115x EHCI HCD
<6>[    6.913909] usb 3-1: New USB device found, idVendor=043e, idProduct=0bdc
<6>[    6.913926] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[    6.913938] usb 3-1: Product: BCMUSB 802.11 Wireless Adapter
<6>[    6.913947] usb 3-1: Manufacturer: Broadcom
<6>[    6.913955] usb 3-1: SerialNumber: 12974
<6>[    7.004975] warning: `zygote' uses 32-bit capabilities (legacy support in use)
<6>[    7.827104] usb 5-1: new full-speed USB device number 2 using LG115x OHCI HCD
<6>[    8.294167] usb 5-1: New USB device found, idVendor=0a12, idProduct=0001
<6>[    8.294211] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<4>[   13.545226] lowmem_shrink: convert oom_adj to oom_score_adj:
<4>[   13.545243] oom_adj 0 => oom_score_adj 0
<4>[   13.545251] oom_adj 1 => oom_score_adj 58
<4>[   13.545259] oom_adj 2 => oom_score_adj 117
<4>[   13.545266] oom_adj 4 => oom_score_adj 235
<4>[   13.545273] oom_adj 9 => oom_score_adj 529
<4>[   13.545280] oom_adj 15 => oom_score_adj 1000
<6>[   14.217528] usbcore: registered new interface driver dbus_usbdev
<4>[   14.217545] 
<4>[   14.217548] Dongle Host Driver, version 1.88.9 (r)
<6>[   15.202843] LG115x EMAC-AHB emac-ahb.0: eth0: physical link established
<6>[   15.202863] LG115x EMAC-AHB emac-ahb.0: eth0: link mode: 100Mbps/FDX
<3>[   16.627828] binder: release proc 1769, transaction 1323, not freed
<6>[   17.124533] input: anymote as /devices/virtual/input/input7
<4>[   19.597373] Mali<2>: Session started
<4>[   20.865296] hrtimer: interrupt took 12935 ns
<4>[   25.899200] Mali<2>: Session started
<4>[   36.100853] Mali<2>: Session started
<4>[   37.383263] de     ] win_id[0] in_port[0] main/sub[0/0] (in_port => MVI/CVD/ADC/HDMI:0/1/2/3)
<4>[   37.383282] de     ] cvi_mux_sel[0] exta_sel[0] extb_sel[1]
<4>[   37.384323] afe    ] ### Setting Color System to [0x1] ###
<4>[   37.804878] de     ] win_id[1] in_port[3] main/sub[0/3] (in_port => MVI/CVD/ADC/HDMI:0/1/2/3)
<4>[   37.804896] de     ] cvi_mux_sel[0] exta_sel[0] extb_sel[1]
<4>[   37.806044] afe    ] ### Setting Color System to [0x1] ###
<4>[   37.849138] adec   ] SetADCPortNumber : ADC Port = 4
<4>[   38.041142] adec   ] SetADCPortNumber : ADC Port = 2
<4>[   38.323001] Mali<2>: Session started
<4>[   39.073807] de     ] win_id[1] in_port[0] main/sub[0/0] (in_port => MVI/CVD/ADC/HDMI:0/1/2/3)
<4>[   39.073825] de     ] cvi_mux_sel[0] exta_sel[0] extb_sel[1]
<4>[   39.075328] afe    ] ### Setting Color System to [0x1] ###
<4>[   39.356226] de     ] win_id[0] in_port[3] main/sub[3/0] (in_port => MVI/CVD/ADC/HDMI:0/1/2/3)
<4>[   39.356251] de     ] cvi_mux_sel[0] exta_sel[0] extb_sel[1]
<4>[   39.358111] afe    ] ### Setting Color System to [0x1] ###
<4>[   39.401128] adec   ] SetADCPortNumber : ADC Port = 4
<3>[   40.286899] binder: release proc 2452, transaction 18592, not freed
<4>[   40.898329] de     ] win_id[0] in_port[0] main/sub[0/0] (in_port => MVI/CVD/ADC/HDMI:0/1/2/3)
<4>[   40.898358] de     ] cvi_mux_sel[0] exta_sel[0] extb_sel[1]
<4>[   40.899303] afe    ] ### Setting Color System to [0x1] ###
<6>[   41.151516] binder: release 2325:2335 transaction 14712 in, still active
<6>[   41.151533] binder: send failed reply for transaction 14712 to 2684:2694
<4>[   41.154503] Mali<2>: Session has ended
<4>[   41.481572] Mali<2>: Session started
<6>[   42.088101] EXT4-fs (mmcblk0p16): re-mounted. Opts: (null)
<6>[   42.161103] EXT4-fs (mmcblk0p16): re-mounted. Opts: (null)
<6>[   42.481191] EXT4-fs (mmcblk0p16): re-mounted. Opts: (null)
<6>[   42.874326] EXT4-fs (mmcblk0p16): re-mounted. Opts: (null)
<6>[   42.943329] EXT4-fs (mmcblk0p16): re-mounted. Opts: (null)
<6>[   43.046563] EXT4-fs (mmcblk0p16): re-mounted. Opts: (null)
<4>[   43.347887] de     ] win_id[1] in_port[3] main/sub[0/3] (in_port => MVI/CVD/ADC/HDMI:0/1/2/3)
<4>[   43.347906] de     ] cvi_mux_sel[0] exta_sel[0] extb_sel[1]
<4>[   43.349092] afe    ] ### Setting Color System to [0x1] ###
<4>[   43.392170] adec   ] SetADCPortNumber : ADC Port = 4
<4>[   52.401729] de     ] win_id[1] in_port[0] main/sub[0/0] (in_port => MVI/CVD/ADC/HDMI:0/1/2/3)
<4>[   52.401749] de     ] cvi_mux_sel[0] exta_sel[0] extb_sel[1]
<4>[   52.402292] afe    ] ### Setting Color System to [0x1] ###
<4>[   52.621979] de     ] win_id[0] in_port[3] main/sub[3/0] (in_port => MVI/CVD/ADC/HDMI:0/1/2/3)
<4>[   52.622005] de     ] cvi_mux_sel[0] exta_sel[0] extb_sel[1]
<4>[   52.623618] afe    ] ### Setting Color System to [0x1] ###
<4>[   52.666141] adec   ] SetADCPortNumber : ADC Port = 4
<4>[   52.812326] [PE_WIN_SetEnhancingWindow,515] w(1),ofs_x(3) invalid.
<4>[   52.846367] [PE_WIN_SetEnhancingWindow,515] w(1),ofs_x(3) invalid.
<4>[   52.857184] adec   ] SetADCPortNumber : ADC Port = 2
<4>[   52.870292] [PE_WIN_SetEnhancingWindow,515] w(1),ofs_x(3) invalid.
<4>[   53.056592] de     ] win_id[0] in_port[0] main/sub[0/0] (in_port => MVI/CVD/ADC/HDMI:0/1/2/3)
<4>[   53.056611] de     ] cvi_mux_sel[0] exta_sel[0] extb_sel[1]
<4>[   53.058286] afe    ] ### Setting Color System to [0x1] ###
<4>[   54.179728] de     ] win_id[0] in_port[3] main/sub[3/0] (in_port => MVI/CVD/ADC/HDMI:0/1/2/3)
<4>[   54.179745] de     ] cvi_mux_sel[0] exta_sel[0] extb_sel[1]
<4>[   54.181005] afe    ] ### Setting Color System to [0x1] ###
<4>[   54.224129] adec   ] SetADCPortNumber : ADC Port = 4
<3>[   54.788517] binder: release proc 2701, transaction 33028, not freed
<3>[   54.788549] binder: release proc 2701, transaction 33029, not freed
<4>[   55.227700] Mali<2>: Session started
<4>[   84.779199] de     ] win_id[0] in_port[0] main/sub[0/0] (in_port => MVI/CVD/ADC/HDMI:0/1/2/3)
<4>[   84.779218] de     ] cvi_mux_sel[0] exta_sel[0] extb_sel[1]
<4>[   84.780213] afe    ] ### Setting Color System to [0x1] ###
<4>[   86.707616] de     ] win_id[1] in_port[3] main/sub[0/3] (in_port => MVI/CVD/ADC/HDMI:0/1/2/3)
<4>[   86.707634] de     ] cvi_mux_sel[0] exta_sel[0] extb_sel[1]
<4>[   86.708610] afe    ] ### Setting Color System to [0x1] ###
<4>[   86.751111] adec   ] SetADCPortNumber : ADC Port = 4
<4>[   86.955154] adec   ] SetADCPortNumber : ADC Port = 2
<4>[   89.173607] de     ] win_id[1] in_port[0] main/sub[0/0] (in_port => MVI/CVD/ADC/HDMI:0/1/2/3)
<4>[   89.173624] de     ] cvi_mux_sel[0] exta_sel[0] extb_sel[1]
<4>[   89.174257] afe    ] ### Setting Color System to [0x1] ###
<4>[   96.890838] Mali<2>: Session started
<3>[  110.406071] init: untracked pid 3547 exited
<3>[  110.689207] init: untracked pid 3549 exited
<6>[  120.463210] usbcore: deregistering interface driver dbus_usbdev
<3>[  147.295076] init: untracked pid 3587 exited
<3>[  147.535065] init: untracked pid 3590 exited
<4>[  180.028108] de     ] win_id[1] in_port[3] main/sub[0/3] (in_port => MVI/CVD/ADC/HDMI:0/1/2/3)
<4>[  180.028131] de     ] cvi_mux_sel[0] exta_sel[0] extb_sel[1]
<4>[  180.029589] afe    ] ### Setting Color System to [0x1] ###
<4>[  180.073150] adec   ] SetADCPortNumber : ADC Port = 4
<4>[  188.319196] de     ] win_id[1] in_port[0] main/sub[0/0] (in_port => MVI/CVD/ADC/HDMI:0/1/2/3)
<4>[  188.319213] de     ] cvi_mux_sel[0] exta_sel[0] extb_sel[1]
<4>[  188.320281] afe    ] ### Setting Color System to [0x1] ###
<4>[  188.528635] Mali<2>: Session started
<4>[  189.331236] Mali<2>: Memory Engine Allocate: Partial allocation on Dedicated Mali GPU memory, resorting to Shared Mali GPU memory
<4>[  244.401858] Mali<2>: Session has ended
<6>[  256.038721] usbcore: registered new interface driver dbus_usbdev
<4>[  256.038738] 
<4>[  256.038741] Dongle Host Driver, version 1.88.9 (r)
<6>[  311.463447] usbcore: deregistering interface driver dbus_usbdev
<4>[  636.732292] Mali<2>: Session started
<3>[  636.789110] init: untracked pid 4013 exited
<3>[  645.615332] init: untracked pid 4071 exited

Im not sure what else is needed to be able to extract the nand/flash but I', happy to provide any information I can.

[Fry-kun]

Somewhat offtopic -- do you know if there are any alt firmwares for ga7900?
I'm guessing that getting root is a step in that direction...

[bmmcwhirt]

To my knowledge there are no publicly available copies of any firmware including the manufacture's update as at this point you can ONLY upgrade the TV online not via USB.

I myself didn't think to do a TCP dump when I did the upgrade to capture a copy of it. If there is another update I will try to remember.

I do not know how to do a firmware dump of this unit having rot or I would do that.

[Fry-kun]

Are you saying there's been an OTA firmware update?
I've noticed a couple app updates, definitely, but not the whole firmware..

[bmmcwhirt]

yea, stock was 3.x and were at 4.2 now.

[heedfulCrayon]

Here is the instructions for how to extract the system dump from your system:
http://forum.xda-developers.com/showthr ... ?t=2450045

I am also interested to see if we can get some good custom roms for this thing. Would love for it to get a ported android TV

[bmmcwhirt]

Here is the instructions for how to extract the system dump from your system:
http://forum.xda-developers.com/showthr ... ?t=2450045

I am also interested to see if we can get some good custom roms for this thing. Would love for it to get a ported android TV

Let me know if you are able to get a successful rom dump. Unfortunately Android fragmentation once again rules and the hardware in the GA will not be able to run newer versions of the OS w/o custom builds unless LG makes one. AndroidTV is now pretty focused on the Nexus set-top.

[erfanoabdi]

Here is the instructions for how to extract the system dump from your system:

I am also interested to see if we can get some good custom roms for this thing. Would love for it to get a ported android TV

Let me know if you are able to get a successful rom dump. Unfortunately Android fragmentation once again rules and the hardware in the GA will not be able to run newer versions of the OS w/o custom builds unless LG makes one. AndroidTV is now pretty focused on the Nexus set-top.

Hi @bmmcwhirt i just joined in this forum to talk to you, if you still have this google tv i need a firmware dump so badly
recently i was able to boot TWRP on my TV with hacking into bootloader
but my TV is not android, it's Netcast4
my goal is installing full android on it and i've been partially successful, i need lg blobs inside the google tv androids to continue
https:// pbs.twimg .com /media/EOSD6rYXsAAYKe0?format=jpg&name=4096x4096

[WeeGee]

Here is the instructions for how to extract the system dump from your system:

I am also interested to see if we can get some good custom roms for this thing. Would love for it to get a ported android TV

Let me know if you are able to get a successful rom dump. Unfortunately Android fragmentation once again rules and the hardware in the GA will not be able to run newer versions of the OS w/o custom builds unless LG makes one. AndroidTV is now pretty focused on the Nexus set-top.

Hi @bmmcwhirt i just joined in this forum to talk to you, if you still have this google tv i need a firmware dump so badly
recently i was able to boot TWRP on my TV with hacking into bootloader
but my TV is not android, it's Netcast4
my goal is installing full android on it and i've been partially successful, i need lg blobs inside the google tv androids to continue
https:// pbs.twimg .com /media/EOSD6rYXsAAYKe0?format=jpg&name=4096x4096

Hello, are YOU still here? I want to talk to you about the NetCast hacking.