Page 18 of 27
Re: Discuss HC 3.1 after installed/ Bug report
Posted: Sun Aug 07, 2011 1:43 pm
by dplawrance
Concerning whether I was able to log into my Google account and complete registration and setup, yes, all is well.
Re: Discuss HC 3.1 after installed/ Bug report
Posted: Sun Aug 07, 2011 10:23 pm
by cdoty
dplawrance wrote:Concerning whether I was able to log into my Google account and complete registration and setup, yes, all is well.
Same here, had no issues with my Google account or setting up my TV remote.
I did initially log in with the original firmware, and connect to my Google account, I'm not sure if that makes a difference or not. It did ask if I wanted to restore Google information to the device.
Re: Discuss HC 3.1 after installed/ Bug report
Posted: Sun Aug 07, 2011 10:30 pm
by gdeeble
I noticed 1 bug tonight pairing the DVR up with the revue, which may be something to monitor, If you have caps on and need to use a number, it will give the ASCII character versus the number, so just an FYI, especially with the passwords. Just make sure caps are off. Otherwise this is a minor bug for some.
Re: Discuss HC 3.1 after installed/ Bug report
Posted: Mon Aug 08, 2011 11:16 am
by seniorstew
I can confirm this is a network setup issue.. Created a hot spot using my Evo 3d and was able to. Sign in and setup fine.
Re: Discuss HC 3.1 after installed/ Bug report
Posted: Mon Aug 08, 2011 12:52 pm
by MechDragon79
seniorstew wrote:I can confirm this is a network setup issue.. Created a hot spot using my Evo 3d and was able to. Sign in and setup fine.
Ok. If this is a network issue I like to know what config works to allow me to complete setup. I have a Motorola Surfboard SBG6580 I left most setting default except wireless network I setup WPA/WPA2 Encryption with TKIP+AES. DHCP not static. Thanks in advance for all help.
Re: Discuss HC 3.1 after installed/ Bug report
Posted: Mon Aug 08, 2011 2:20 pm
by seniorstew
Change your wifi to wpa only
Re: Discuss HC 3.1 after installed/ Bug report
Posted: Mon Aug 08, 2011 2:30 pm
by killer4110
I have read the posts about wifi, When i try and connect to wifi, it just says error, nothing else, i have changed all settings in my router,this is what it looks like
http://imgur.com/6H1Bx .....
Re: Discuss HC 3.1 after installed/ Bug report
Posted: Mon Aug 08, 2011 3:33 pm
by MechDragon79
seniorstew wrote:Change your wifi to wpa only
I tried wpa only and my revue doesn't even find it.
Re: Discuss HC 3.1 after installed/ Bug report
Posted: Mon Aug 08, 2011 4:34 pm
by txyaloo
MechDragon79 wrote:seniorstew wrote:Change your wifi to wpa only
I tried wpa only and my revue doesn't even find it.
Are you broadcasting your SSID on your network? Revue won't find my WIFI until I turn SSID broadcast back on.
Re: Discuss HC 3.1 after installed/ Bug report
Posted: Mon Aug 08, 2011 4:43 pm
by MechDragon79
txyaloo wrote:MechDragon79 wrote:seniorstew wrote:Change your wifi to wpa only
I tried wpa only and my revue doesn't even find it.
Are you broadcasting your SSID on your network? Revue won't find my WIFI until I turn SSID broadcast back on.
Yes it is broadcasting.