found device 0x0451:0xd00e
download ok
while loop size = 246572
filesize = 246572
Error in usb_bulk_read: -110
- All Done, Drink all the booze, Hack all the things.
Unable to root Nest
Unable to root Nest
I get the following when attempting to root my Nest
-
- Android 1.0
- Posts: 1
- Joined: Mon Dec 08, 2014 4:27 am
- GTV Device Owned: NSX-40GT1 (Internet TV)
Re: Unable to root Nest
I've had this same error "Error in usb_bulk_read: -110". It seems to be specific to the host you are running the script on, but I haven't found a definite answer as to why.
I'd recommend switching to another computer with different USB ports and run the script there. I was having problems with Ubuntu 12.04 on an Asus Desktop board, then switched to Crunchbang with Debian 7.7 on an Asus EeePC 1000. The problem went away, although I want to point out that the instructions are need to been very specific in the order that you do things: 1) run the script first, then 2) connect the Nest Thermostat, and then 3) reboot the Thermostat by holding down it's screen/button for 10 seconds.
Maybe it's something to do with the USB host controller or a bad cable, but it does read the device, so I can't understand it.
Other things to ensure is that you're using a 32-bit system or a 64-bit system on the host. It's been mentioned that it can have an impact, depending on instruction sets when compiling the images for the Thermostat.
Good luck!
I'd recommend switching to another computer with different USB ports and run the script there. I was having problems with Ubuntu 12.04 on an Asus Desktop board, then switched to Crunchbang with Debian 7.7 on an Asus EeePC 1000. The problem went away, although I want to point out that the instructions are need to been very specific in the order that you do things: 1) run the script first, then 2) connect the Nest Thermostat, and then 3) reboot the Thermostat by holding down it's screen/button for 10 seconds.
Maybe it's something to do with the USB host controller or a bad cable, but it does read the device, so I can't understand it.
Other things to ensure is that you're using a 32-bit system or a 64-bit system on the host. It's been mentioned that it can have an impact, depending on instruction sets when compiling the images for the Thermostat.
Good luck!