This thread is for discussion of our most recent blog post Hisense Pulse: Insecure at launch, accident or message?.
Click here to use our amazon affiliate link and show your support for GTVHacker.
Thanks,
Zenofex
Hisense Pulse: Insecure at launch, accident or message?
Hisense Pulse: Insecure at launch, accident or message?
Bitcoin donations can be sent to:
15mb6ER9gbujUXJABBd146W34FwWX2F1Lx
15mb6ER9gbujUXJABBd146W34FwWX2F1Lx
Re: Hisense Pulse: Insecure at launch, accident or message?
As a current Logitech Revue owner i just bought the Pulse after seeing this
I would suggest that anyone and everyone who is going to buy this, reach out to the company over social media, email, tin-can+string and tell them that this is why your buying the device.
I would suggest that anyone and everyone who is going to buy this, reach out to the company over social media, email, tin-can+string and tell them that this is why your buying the device.
-
- Android 1.0
- Posts: 15
- Joined: Fri Nov 30, 2012 3:37 pm
- GTV Device Owned: Sony NSZ-GS7 (v2 streamer)
Re: Hisense Pulse: Insecure at launch, accident or message?
Can you comment on the Pulse's software reliability?
A lot of Vizio Co-Star users report the Co-Star freezes often due to heat buildup caused by its small form factor. Since the Pulse is almost identical in size to the Co-Star, does it also suffer from software freezes due to heat?
A lot of Vizio Co-Star users report the Co-Star freezes often due to heat buildup caused by its small form factor. Since the Pulse is almost identical in size to the Co-Star, does it also suffer from software freezes due to heat?
Re: Hisense Pulse: Insecure at launch, accident or message?
I haven't really used the box all too much, but it was on for a good day straight. Temps were reported at about 60C, it's passive of course, so it's to be expected. However without the custom UI that Vizio stuck on (note: have yet to try the Co-Star 3.5.0 update), it feels less laggy, snappier to respond.mjeshurun wrote:Can you comment on the Pulse's software reliability?
A lot of Vizio Co-Star users report the Co-Star freezes often due to heat buildup caused by its small form factor. Since the Pulse is almost identical in size to the Co-Star, does it also suffer from software freezes due to heat?
Then again, it seems to share just about the same design, with the exception of the placement of a few items on the mainboard.
-
- Android 1.0
- Posts: 15
- Joined: Fri Nov 30, 2012 3:37 pm
- GTV Device Owned: Sony NSZ-GS7 (v2 streamer)
Re: Hisense Pulse: Insecure at launch, accident or message?
Hey cj_000, thanks for the quick answer!cj_000 wrote:I haven't really used the box all too much, but it was on for a good day straight. Temps were reported at about 60C, it's passive of course, so it's to be expected. However without the custom UI that Vizio stuck on (note: have yet to try the Co-Star 3.5.0 update), it feels less laggy, snappier to respond.mjeshurun wrote:Can you comment on the Pulse's software reliability?
A lot of Vizio Co-Star users report the Co-Star freezes often due to heat buildup caused by its small form factor. Since the Pulse is almost identical in size to the Co-Star, does it also suffer from software freezes due to heat?
Then again, it seems to share just about the same design, with the exception of the placement of a few items on the mainboard.
Can you by chance say if the Pulse supports MKV videos with AC3 surround sound?
-
- Android 1.0
- Posts: 15
- Joined: Fri Nov 30, 2012 3:37 pm
- GTV Device Owned: Sony NSZ-GS7 (v2 streamer)
Re: Hisense Pulse: Insecure at launch, accident or message?
Unboxing, setup and features review for the Hisense Pulse
https://www.youtube.com/watch?feature=p ... MbQFSS48q0
https://www.youtube.com/watch?feature=p ... MbQFSS48q0
Re: Hisense Pulse: Insecure at launch, accident or message?
Any chance of a walkthru for us noobs to root the pulse? I've used three different adb's and can adb connect thru the lan to the ip address of the pulse but the next step of adb root gives a device not found error. Even thought the adb connect show connection on port 5555, the adb devices command show nothing.
Thanks!
Thanks!
Re: Hisense Pulse: Insecure at launch, accident or message?
helousn wrote:Any chance of a walkthru for us noobs to root the pulse? I've used three different adb's and can adb connect thru the lan to the ip address of the pulse but the next step of adb root gives a device not found error. Even thought the adb connect show connection on port 5555, the adb devices command show nothing.
Thanks!
On the pulse, go to All Applications, Settings, then Applications. Hit development. Check off "Enable Remote Debugging", a message will pop up saying "your files can be modified", press ok.
Then, go to the option below that, says "Remote Debugger IP", go back, and enter your PC's local IP address, then try to re-connect with adb!
Re: Hisense Pulse: Insecure at launch, accident or message?
Any custom recoveries for it yet? CWM would be awesome!
Re: Hisense Pulse: Insecure at launch, accident or message?
cj_000 wrote:helousn wrote:Any chance of a walkthru for us noobs to root the pulse? I've used three different adb's and can adb connect thru the lan to the ip address of the pulse but the next step of adb root gives a device not found error. Even thought the adb connect show connection on port 5555, the adb devices command show nothing.
Thanks!
On the pulse, go to All Applications, Settings, then Applications. Hit development. Check off "Enable Remote Debugging", a message will pop up saying "your files can be modified", press ok.
Then, go to the option below that, says "Remote Debugger IP", go back, and enter your PC's local IP address, then try to re-connect with adb!
Thanks! Definitely closer.. but still not there yet..
N:\adt-bundle-windows-x86_64\adt-bundle-windows-x86_64\sdk\platform-tools>adb connect 192.168.2.11
connected to 192.168.2.11:5555
N:\adt-bundle-windows-x86_64\adt-bundle-windows-x86_64\sdk\platform-tools>adb root
restarting adbd as root
N:\adt-bundle-windows-x86_64\adt-bundle-windows-x86_64\sdk\platform-tools>adb connect 192.168.2.11
connected to 192.168.2.11:5555
N:\adt-bundle-windows-x86_64\adt-bundle-windows-x86_64\sdk\platform-tools>adb push pulse_root.sh /tmp/pulse_root.sh
382 KB/s (1177929 bytes in 3.010s)
N:\adt-bundle-windows-x86_64\adt-bundle-windows-x86_64\sdk\platform-tools>adb shell
# sh /tmp/pulse_root.sh
sh /tmp/pulse_root.sh
_____ _________ ___ _ _
/ ____|__ __\ \ / / | | | | |
| | __ | | \ \ / /| |__| | __ _ ___| | _____ _ __
| | |_ | | | \ \/ / | __ |/ _` |/ __| |/ / _ \ '__|
| |__| | | | \ / | | | | (_| | (__| < __/ |
\_____| |_| \/ |_| |_|\__,_|\___|_|\_\___|_|
################ Hisense Pulse Root #####################
This script installs the Superuser.apk package as well as installs the content p
rovider bypass.
For support vist: http://www.GTVHacker.com
Extracting /tmp/gtvhacker.zip to /tmp/gtvhacker/.
unzip: can't open /tmp/gtvhacker.zip, /tmp/gtvhacker.zip.zip, /tmp/gtvhacker.zip
.ZIP
Remounting /system read/write.
Copy su binary and Superuser.apk to /system.
cp: /tmp/gtvhacker/su: No such file or directory
cp: /tmp/gtvhacker/Superuser.apk: No such file or directory
Set correct permissions for su binary.
Unable to chmod /system/bin/su: No such file or directory
Backing up flash.
Mutating the flash string. This should take about 30 seconds or so.
Preventing future automatic updates.
Remounting /system read/only.
Done! Make sure to change Chrome's user agent and then reboot!
So I'm sure I'm missing something but for the life of me I don't know what it is... I redownloaded the pulse_root.sh file but no difference..
Any hints would be great!