Well I screwed up and flashed the update to the Honeycomb Debug without flashing the first update. I renamed the wrong file update.zip and now only boot to an Exclamation point in the triangle.
Is there anything I can do? Is it possible to push the files and update via adb shell?
I'm pretty good at getting around in android so I can handle the procedure if there is one.
Thanks
I Think I'm bricked
Moderator: Revue Mod
Re: I Think I'm bricked
Sadly you are bricked.
Specifically, in that version that you updated to the recovery functionality was removed (so, it does not work).
Unfortunately there is no software fix for this type of brick - there might be a hardware way, but your talking pulling flash chips = not the easiest for most people.
Specifically, in that version that you updated to the recovery functionality was removed (so, it does not work).
Unfortunately there is no software fix for this type of brick - there might be a hardware way, but your talking pulling flash chips = not the easiest for most people.
Re: I Think I'm bricked
Ok thanks.
Live and learn I suppose.
Live and learn I suppose.
Re: I Think I'm bricked
I installed Honeycomb 3.1 on my Logitech Revue(1b3a6b1aa9fd.mp-signed-ota_update-b55579) but, after access in recovery and install update.zip, out error installation aborted failed to stat build.pro.
install/sdcard........
finding update packege.......
opening update pacckage.........
installing update.......
file_getprop: failed to stat /mnt/system/build.prop
E:Error in /tmp/sideload/package.zip
(status 7)
Installation aborted.
I tried flash release Honeycomb 3.1 but go only error.
Thanks
install/sdcard........
finding update packege.......
opening update pacckage.........
installing update.......
file_getprop: failed to stat /mnt/system/build.prop
E:Error in /tmp/sideload/package.zip
(status 7)
Installation aborted.
I tried flash release Honeycomb 3.1 but go only error.
Thanks