Updating to future USB updates from HC "User-Debug" leak

Moderator: Revue Mod

Discovered
2.2 Froyo
Posts: 232
Joined: Thu Dec 08, 2011 9:57 am
GTV Device Owned: Logitech Revue

Re: Updating to future USB updates from HC "User-Debug" leak

Post by Discovered » Fri Dec 09, 2011 9:16 am

try to connect without the port
LGVM670 - CM 9
IPhone 3GS - IOS 5.1.1
Revue - HC 3.2
Aspire 3000 - JoliOS

publicanimal
Android 1.0
Posts: 10
Joined: Sat Dec 03, 2011 7:50 pm
GTV Device Owned: Logitech Revue

Re: Updating to future USB updates from HC "User-Debug" leak

Post by publicanimal » Fri Dec 09, 2011 10:33 am

havikx wrote:
publicanimal wrote:You're doing it wrong


no? really? cuz i couldn't figure that one out on my own. really. the "syntax error" means it worked right? right?d


duh. i understand I'm doing it wrong. i wrote in hopes of some1 with skills would point out my error...not some noob tell me i'm doing it wrong.
I think the real noob is the guy asking the same question over and over after it has already been answered. Try reading through the thread before posting. If I had said any more it would have been redundant.
Last edited by publicanimal on Fri Dec 09, 2011 11:25 am, edited 1 time in total.

Discovered
2.2 Froyo
Posts: 232
Joined: Thu Dec 08, 2011 9:57 am
GTV Device Owned: Logitech Revue

Re: Updating to future USB updates from HC "User-Debug" leak

Post by Discovered » Fri Dec 09, 2011 11:23 am

haha.
LGVM670 - CM 9
IPhone 3GS - IOS 5.1.1
Revue - HC 3.2
Aspire 3000 - JoliOS

User avatar
resno
The Green One
Posts: 125
Joined: Thu Jan 13, 2011 8:22 am
GTV Device Owned: Logitech Revue
Location: 010101110
Contact:

Re: Updating to future USB updates from HC "User-Debug" leak

Post by resno » Fri Dec 09, 2011 12:05 pm

publicanimal and discovered, lets be friendly here. Thanks.

If you have nothing nice to say, saying nothing.
General Person Of Interest
Want to give back? :: Bitcoins :: Hardware ::

publicanimal
Android 1.0
Posts: 10
Joined: Sat Dec 03, 2011 7:50 pm
GTV Device Owned: Logitech Revue

Re: Updating to future USB updates from HC "User-Debug" leak

Post by publicanimal » Fri Dec 09, 2011 12:41 pm

resno wrote:publicanimal and discovered, lets be friendly here. Thanks.

If you have nothing nice to say, saying nothing.
So the guy who starts the name calling gets a pass? Nice.

havikx
1.6 Donut
Posts: 146
Joined: Mon Aug 08, 2011 8:14 pm
GTV Device Owned: Logitech Revue
Location: New Jersey, SEVEN3II

Re: Updating to future USB updates from HC "User-Debug" leak

Post by havikx » Fri Dec 09, 2011 1:11 pm

publicanimal wrote:
resno wrote:publicanimal and discovered, lets be friendly here. Thanks.

If you have nothing nice to say, saying nothing.
So the guy who starts the name calling gets a pass? Nice.

not for nothing....but the instructions are more for windows users. as i stated before...mac terminal commands are slightly different than a pc. you really think as long as i've been here i don't know there is a thread about it...or that i don't know how to use a search button? really?

if you have no suggestions for me or other users having problems, please refrain from posting as to not clog the thread with nonsense. i'm sure i'm not the only user who is trying to mod using OSx and i feel this thread should contain more knowledge about developing rather than newer users blasting veteran users for asking help about terminal commands in other operating systems. just my 2 cents.

also...discovered hasn't said anything negative. i see him trying to help out other users. thanks in advance buddy.
HTC one s - cm10 jellybean unofficial
T-mobile g1 - cm6
T-Mobile g2- andromadus ics beta
T-Mobile hd2- cm9 by tytung
HP touchpad- CM9 alpha 2
Logitech revue- OTA downgrade 3.1
Member xda forums

havikx
1.6 Donut
Posts: 146
Joined: Mon Aug 08, 2011 8:14 pm
GTV Device Owned: Logitech Revue
Location: New Jersey, SEVEN3II

Re: Updating to future USB updates from HC "User-Debug" leak

Post by havikx » Fri Dec 09, 2011 1:23 pm

ok... so again...

./adb connect <10.0.0.11> (formatted recently cuz box got unstable and kept rebooting. new ip)
this throws syntax error near unexpected token newline

./adb connect<10.0.0.11>[:<5555>]
this throws syntax error near unexpected token near 5555

./adb connect
this gives me adb connect <hosts>:[<port>]

it seems that the way i'm typing it in the 2nd example is how it should appear based on what they system example says to use.
HTC one s - cm10 jellybean unofficial
T-mobile g1 - cm6
T-Mobile g2- andromadus ics beta
T-Mobile hd2- cm9 by tytung
HP touchpad- CM9 alpha 2
Logitech revue- OTA downgrade 3.1
Member xda forums

Discovered
2.2 Froyo
Posts: 232
Joined: Thu Dec 08, 2011 9:57 am
GTV Device Owned: Logitech Revue

Re: Updating to future USB updates from HC "User-Debug" leak

Post by Discovered » Fri Dec 09, 2011 1:44 pm

typo: YOU PUT::::./adb connect<10.0.0.11>[:<5555>]
YOU NEED
adb connect <10.0.0.11>:[<5555>]
LGVM670 - CM 9
IPhone 3GS - IOS 5.1.1
Revue - HC 3.2
Aspire 3000 - JoliOS

publicanimal
Android 1.0
Posts: 10
Joined: Sat Dec 03, 2011 7:50 pm
GTV Device Owned: Logitech Revue

Re: Updating to future USB updates from HC "User-Debug" leak

Post by publicanimal » Fri Dec 09, 2011 1:46 pm

So with the recovery from this thread when I boot into recovery using the adb reboot recovery command, I boot to a screen with a triangle with an exclamation point. When I try to manually boot into recovery using the [Alt]+[L] method, I get nothing. I am on the user-debug build.

EDIT: I was able to get it to work after flashing the recovery.img from the first honeycomb leak. The one in this thread actually didn't work for me.
Last edited by publicanimal on Fri Dec 09, 2011 2:54 pm, edited 3 times in total.

mrbobhcrhs
Android 1.0
Posts: 7
Joined: Fri Dec 09, 2011 2:18 pm
GTV Device Owned: Logitech Revue

Re: Updating to future USB updates from HC "User-Debug" leak

Post by mrbobhcrhs » Fri Dec 09, 2011 2:21 pm

havikx wrote:ok... so again...

./adb connect <10.0.0.11> (formatted recently cuz box got unstable and kept rebooting. new ip)
this throws syntax error near unexpected token newline

./adb connect<10.0.0.11>[:<5555>]
this throws syntax error near unexpected token near 5555

./adb connect
this gives me adb connect <hosts>:[<port>]

it seems that the way i'm typing it in the 2nd example is how it should appear based on what they system example says to use.
Discovered wrote:typo: YOU PUT::::./adb connect<10.0.0.11>[:<5555>]
YOU NEED
adb connect <10.0.0.11>:[<5555>]
as he said he is a mac user which is closer to linux, on my linux box I use:

Code: Select all

./adb connect 192.168.1.1
no < or [ or ports.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests

 

 

cron

Login  •  Register