Hello to you all. I have found a way for all of us to get to the recovery!! all you have to do is unzip the update file to the root of the usb, then hold down the button and plug in the unit. at this point it will read the boot file so we can get into recovery!! then update to to new update now her...

I'm having the same problem(s). So far I have tried two different USB thumbdrives and a USB keyboard. Both thumbdrives have activity LED's and I have not seen either light up at any point during the boot process. At this point, I'm not sure what else to do. My Drives are Fat32 formatted and the lar...

Do you think it is possible to create a USB boot disk that CEFDk will be able to use? I ask this as see strings refering to USB and boot in your post. My revue hangs on the Logitech startup screen after upgrading and a power fail. There are more like me with a similar issue. After playing around I n...

Thanks for the pointer. Whilst I have not done any Android I have a lot of embedded development experience and access to Osciloscopes etc. I will give it a go and will appreciate any help. I have looked at verious threads on CEFDK and can see why you suggested this approach. If I understand this cor...

Tried hdmi in/out sequence without any luck. I see also that there is a serial terminal interface on the board. I will hook it up and see if any info is being printed. Connected the serial interface and tried various boots but it is dead. Anyone have know a way to sniff comms with a usb drive? I wo...

I had the same problem, when the Screen log is on ( stuck) I did the following. Let me know if this helps you guys. 1/ The Screen is stuck with Logitech review TV log. 2/ I disconnected the HDMI input cable and connected it back 3/ I disconnected the HDMI output cable and connected it back. It will...

Tried hdmi in/out sequence without any luck. Tried using another USB flash drive also without any luck. What exactly must be on the flash drive . I only have the update.zip. My gut tells me that due to rebooting and holding the reset button when the USB drive led flashes that the Revue is looking fo...

Dont know if this info will help. I inserted an old usb flash drive (258MB) into the slot next to the Lan . When booting with the 1 second pause and pushing the button , the drive light starts to flash as though it is being read. If I let go the button at this point the logo comes up and the drive l...

Ditto for me. Pre non-boot mode: Were you using wireless for your network connection? Yes, was changing a network setting when power failed. Did you have adb enabled? No Post non-boot mode: (if wireless earlier)Have you moved to a hardwired network connection? No (if adb previously enabled)Does adb ...

Also stuck after power loss. Tried many combinations of boot and Alt-L. No luck yet.
Reading through the forum it seems to be a problem with a few users after the upgrade.