Victory! Just after my last update, I tried one last thing before throwing the Revue in the trash And it actually worked! My key change is to remove the USB drive from the Revue! (only HDMI out to TV and power plugged in) Then I: 1. Plugged the power 2. Waited 1 full second 3. Pressed the Connect b...

jTV wrote:come on Google TV hackers, we have high hopes in you!
I am pretty sure there are many of us with a brick due to power outage during set up that would really appreciate your effort.

Yes, that is right! And I ready to provide any help to revue community.

MStrawder wrote:As Discovered mentioned, you can try this method. It's definitely more involved, but seems to be the best solution for those who's systems do not respond to user input.

Solution from zenofex didn't help me yet... So if some one has any advice - I will appreciate.

zenofex I will fix it later, but I wold like to understood how it works first. We disconnect an UART. This UART connect SOC with USB Flash controller. It is mining that not any controller can be used - so I will try different USB flash pens before restore revue. About revue boot sequence 1. Bootload...

zenofex

Could you please give us explonation to this solution? Did I attach cords to some UART (in USB mode)? Has kernel some options to mount device at this uart and does it have driver for keyboard? And how it process Ctr+Alt+Del command?

I did solder job and it looks good. But Ctrl-Alt-Del combination doesn't work. Please look at photo

http://i.imgur.com/6EtfJ.jpg
http://i.imgur.com/P45Rm.jpg
http://i.imgur.com/Vnyoj.jpg
http://i.imgur.com/VN8TM.jpg

P.S. My revue stuck at Logitech Revue splash screen.

I would try Zenofex solution to fix my revue with applied the 55579 firmware and wich remains only in the splash screen.

Guys,
I have the same problem with my Revue/brick. I can't get recovery mode with any combination of sink button, USB flash or buttons on keyboard.
Does anybody has solution? I can't believe that this situation have no solution.

MStrawder wrote: I'm sure you have by now, but in case you haven't, try the tips in this thread. One suggestion that worked for several people was to only press the connect button once rather then hold it.

Thanks a lot, I will look at this topic.

Just thinking out load You did format the pen and you did rename it to update and you have done alt-l fingers pressed down Try hitting alt- L 20-30 TIMES REAL FAST. and have you tried to get into recovery with no usb stick inserted dont know if you can but worth a try Other than that mate not sure ...